I found reading alot of different material rounded my knowledge the DNS and WINS. Subnetting was easy simple questions if you know the tables:

mask # of subnets Bit interval # of hosts

192 2 64 62

224 6 32 30

240 14 16 14

248 30 8 6

252 62 4 2

254 126 2 -

255 254 1 -


128 + 64 + 32 + 16 +8 + 4 + 2 + 1

\ \ \ \ \ \ \

192 224 240 248 252 254 255

I passed this monster with 827, really alot of DNS, WINS and DHCP.

Know the utilities:

ping
ipconfig/all/renew/release
nbtstat -n,-R,-c
netstat
route print
tracert
arp -s,-a,-g,-d
lpq
lpr
Performance Monitor and Network Monitor, know the difference between which will capture frames (Ethernet) and which will chart or log data to be viewed thru spreadsheet.

You need to know Netbios Name Resolution and Host name resolution

How to integrate WINS and DNS.

How to enable DNS for WINS resolution.

DHCP can only integrate with WINS if you specify the 44/NBNS server, and /46NBT node type

Know the #PRE #DOM #INCLUDE from lmhosts-file

Exclude UNIX clients from any DHCP scopes

The cache.dns file contain's name to-IP-addressing information for the Internet's root DNS servers.

For routing you need to enable IP forwarding.

RIP for IP effeciently solves problem of having to update routing tables.

For DHCP to assign IP addresses to a remote subnet, a DHCP Relay Agent needs to be set up on router in between subnets to broadcast requests, or DHCP servers must be on both subnets.

Know the problems when you have an LMHOSTS file and you can remove the # signs out, example:

147.68.56.54 #APPServer

147.68.22.34 #Dserver

147.68.57.87 #3server

Be familiar with the SNMPmanager and agent. Know what a community name and a trap are.

Know that you need to install TCP/IP printing services to have an NT 4.0 print server print to a UNIX printing device.

Know the difference between Global, Scope, and Client Options in DHCP

KNOW the CNAME and MX resource records


--------------------------------------------------------------------------------


Well I had a few scenario questions which involved the DHCP configuration.

Network with 100 workstations and 20 UNIX computers. UNIX computers never move, TCP/IP is protocol used. DHCP configured with one scope for each subnet. All Windows based computers are set up as DHCP clients.

Required results:

1) Every Windows based computer on each subnet must be able to access the Windows NT Server computers by computer name.

2) Every Windows based computer on each subnet must also be able to receive its IP address from the DHCP server.

[1] [2] 下一页